Stand out with this incredible Body Kit PD-M for all BMW Series 3 E92-E93 up to facelift. Years: 2004 - 2013
It is possible to purchase the parts separately.
- Front Bumper
- Front Fenders
- Rear Bumper
- Side Skirts
- Hood (Vented or Not-Vented)
- Trunk Spoiler
- Roof Spoiler
These products are TUV approved
Note: If your vehicle is a facelift model, the front bumper cannot be installed due to the changed headlights. The tailgate & roof spoiler is only suitable for e92 Coupé models. In vehicles with PDC, recesses in the bumper must be prepared to mount the PDC sensors. In vehicles with an existing SRA, the existing headlight cleaning system can be adapted into the front bumper. To do this, the cutouts must also be cut out and the headlight cleaning system glued into the front bumper. Ideally, you take over almost the entire interior of the original series front bumper. The cutouts in the fenders are the same as the original M3 fenders, so ideally original BMW M3 gills/indicators are to be used. It is also important to note that the original washer fluid tank must be replaced with a smaller original M3 washer fluid tank. In convertible models, the control unit located under the fender must be moved. To assemble the bonnet, the original hinges of the standard bonnet must be adopted. The insulation mat can be left out in the area of the front air intakes. The air intakes on the right and left are identical to those of the original M3 bonnet, so the original BMW M3 air intakes should ideally be used. When using a standard / not M3 style exhaust system, small adjustments to the ESD or the rear bumper may be required. Depending on the exhaust position, this can be appropriately left out by the buyer. An assembly of fog lights is not intended as with the original BMW M3. These can be adapted into the front bumper by fog lamp mounts if desired. If fog lights were previously available and should no longer be installed, these can be deactivated by BMW via the software if an error message appears or can be blended using a resistor.
- Dura-Flex FRP Construction
- Excellent fit & finish
- Shipped un-painted
- Includes installation materials
Prior Design is born from the idea of combining a sporty and aggressive design with elegance. Their experienced design team set itself a goal of creating parts that exhibit individuality and harmony of design. After countless hours of development and refinement, every product is designed so that the existing aesthetics and features of the vehicles are perfectly integrated into the new kits, to make a statement of unique passion and individuality. The results are timeless masterpieces that combine European style, individuality and quality with modern technology.
To meet the world's most rigorous testing, all Prior Design products are built to the highest standards and exceed all German TUV testing requirements. A multitude of hours and complex tests are needed to ensure that the FRP (Fibre-reinforced plastic) is at its maximum performance and durability and that it is of the highest quality, perfect fit and technical excellence.
Prior Design products are made from quality Dura-Flex FRP (Fiber Reinforced Plastic). This material is characterized by an excellent surface finish that provides sufficient flexibility combined with high stability and allows for easy and inexpensive painting. All parts are all made with excellent fitment with no modifications or alterations needed for the parts, which minimizes installation costs.
Images of products are only for information purposes and can change due to continuous product development. Prices, images and product description are subject to change without notice. Not responsible for typographical errors.